1in. 7 Segment LED Common Cathode Display, Red


1in. 7 Segment LED Common Cathode Display, Red
Images/15123-large.jpg Images/15123-1.jpg Images/15123-2.jpg   California Proposition 65 Warning
Stock Number: 15123 OP
 Review Average:  
 Number of Reviews: 3
 View Reviews | Review this item
$0.95
$0.19 
This item is discontinued & is not being restocked.


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Red, Common Cathode 7 segment display. 660nm, 15-20mcd, 20mA max forward current, 5V max reverse voltage, 2.2V (typ) forward drop.
Terminals: Top & Bottom
WT: .01

California Proposition 65 Warning WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
(This item was manufactured prior to August 31st, 2018)
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.

As an example:
   ABS plastic contains styrene
   PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
   electrolytic capacitors can contain Ethylene glycol
   Brass can contain Lead
   flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
   Aluminum alloys can contain Chromium

To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!


 Product ReviewsClick here to review this item
Nice easy to read
Here a little project I did. ____________________________________________________________________________ https://www.pcbway.com/project/shareproject/W14332ASZ1_Project_Outputs_for_7segment_Shift.html
- I B, FL
 
Nice Bright Red Displays
These are nice displays for any project. I have found 10mA to be a good value for proper brightness. The current jumps past 15mA very quickly which will burn these out so be careful. Here is the pin out for the displays I received: Pin1 - SEG E, Pin2 - SEG D, Pin3 - Common Cathode, Pin4 - SEG C, Pin5 - D.P., Pin6 - SEG B, Pin7 - SEG A, Pin8 - Common Cathode, Pin9 - SEG F, Pin10 - SEG G.
- Glenn, TX
 
Very bright, large enough to read across the room
At first, I couldnt get it to work with the voltage specified in the description. Then I found the datasheet here: http://www.foryard-led.ru/pdf/fys-10014ax_bx.pdf. All the segments except the decimal point are two LEDs in series, so if you are going by voltage instead of current, it has to be doubled. The center pins on the top and bottom are the cathodes they are connected.
 

Recently Viewed Items